
Concrete Repair Materials
SAAK concrete repair materials for treating cracks and damaged concrete surfaces and rehabilitating them with high efficiency.
The right product for every type of damage
From small surface voids to structural cracks, floor leveling, and filling and anchoring works.
FCHoneycombing and small voidsSAAK Repair FC
A cementitious mortar coating applied in thin layers to give concrete or masonry surfaces a good finish, in preparation for a protective or decorative coat.
- Use
- Fine formula ready for direct use
- Note
- Best mixed with bond
- Packaging
- 20 kg bag
HSCracks and structural concreteSAAK Repair Extra HS
A ready-mixed blend of dry powders that only requires clean water to produce a high-build repair mortar for structural concrete and masonry.
- Performance
- Shrinkage control and low water permeability
- Note
- Best mixed with bond
- Packaging
- 20 kg bag
SLFloor levelingSAAK Self-Leveling Top
A fine powder of cement, selected aggregates and special additives that forms a fluid, free-flowing mix when combined with water, ensuring perfect leveling.
- Thickness
- From 5 to 50 mm
- Performance
- Minimal shrinkage and high crack resistance
- Packaging
- 20 kg bag
NSGFilling and anchoringNon-Shrink Grout
A flowable cementitious mortar with two-stage expansion and selected aggregates, offering high strength for filling and anchoring applications.
- Thickness
- From 10 to 100 mm
- Performance
- Shrinkage control and very low permeability
- Packaging
- 20 kg bag
Which product suits the repair?
Identify the type of damage on site and we will take you straight to the right product.
| # | Type of work | Suitable product |
|---|---|---|
| 01 | Honeycombing and small voids, and preparing the surface for a protective or decorative coat | FC – SAAK Repair FC → |
| 02 | Cracks in structural concrete or masonry | HS – SAAK Repair Extra HS → |
| 03 | Floor leveling from 5 to 50 mm thick | SL – SAAK Self-Leveling Top → |
| 04 | Filling and anchoring works from 10 to 100 mm thick | NSG – Non-Shrink Grout → |

Use it with bond
It is recommended to mix SAAK Repair FC and SAAK Repair Extra HS with the bond when repairing honeycombing and cracks in concrete.


